US Toll Free: 1.800.237.1444 • Phone: 916.371.4493
Contact Us

Driveshaft Assembly & Balancing Equipment Manufacturers

Increase Your Productivity with Westport Driveshaft Balancing Machines

Westport Machine Works offers driveshaft balancing machines for building and repairing automotive and heavy truck driveshafts. Our all-in-one Shaftmaker machines are capable of pressing, straightening, welding, and balancing driveshafts with outstanding precision and accuracy. The Shaftmaker, with its 15 ton hydraulic pressing system, 14” swing, and balance speed up to 3000 RPM, is the perfect choice for any driveshaft repair business looking to increase its capabilities and boost productivity.

Made in the USA since 1957

Our products are produced "100%" in our facility in West Sacramento, California. CNC equipment, low overhead and a small family business since 1957, adds up to the highest quality product for the least amount of money. Machining, welding, painting, electrical assembly and quality control all start and finish at Westport Machine Works. Please take advantage of our special financing rates.


SHAFTMAKER HD DRIVESHAFT BALANCING MACHINE
SHAFTMAKER HD - LARGE TRUCK DRIVESHAFT BALANCING MACHINE
PRESS-WELD-STRAIGHTEN-BALANCE ALL IN ONE MACHINE
• 17' Tool Tray
• 17' Base
• 14" Swing
• 10 HP Motor
• 220 Three Phase Power
• 0-3000 RPM Digital Display
• Strobe Balancing System
• 15 Ton Hydraulic System
• Weight Capacity: 1000 lb.
• Machine Weight: 3000 lb.
• Footprint: 220"L x 35"W
Complete Package Available

SHAFTMAKER DRIVESHAFT BALANCING MACHINE SHAFTMAKER - DRIVESHAFT BALANCING MACHINE
PRESS-WELD-STRAIGHTEN-BALANCE ALL IN ONE MACHINE
• 17' Tool Tray
• 17' Base
• 14" Swing
• 3 HP Motor
• 220 Single Phase Power
• 0-3000 RPM Digital Display
• Strobe Balancing System
• 15 Ton Hydraulic System
• Weight Capacity: 1000 lb.
• Machine Weight: 2500 lb.
• Footprint: 204"L x 20"W
Complete Package Available

SOCKET CHUCK FIXTURES & BALANCERS SOCKET CHUCK FIXTURES & BALANCERS
Westport Balancers are now available with an optional 2-1/4" Socket Chuck Spindle. This spindle fits 2-1/4" diameter fixtures that have the set screw dimple for locking in place.

Our Socket Chuck Yoke Fixtures fit the 2-1/4" socket chuck style Axiline/Superior Driveline Machines. The Socket Chuck Yoke Fixtures are pre-balanced and come with the strap kit. Socket Chuck Yoke Fixtures are available in sizes from 1210 through 1810 and SPL and RPL.


POP-IT 10 TON PARTS SEPARATOR POP-IT 10 TON PARTS SEPARATOR
The "POP-IT" hydraulic press is a 10 ton hydraulic system. Using the POP-IT in either the horizontal or the vertical position enables the removal and installation of component parts such as U-joints, center bearings, midship yokes, and slip yokes. The unit has hinges that can be welded down to your table for easy mounting.

OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT
• Live Center
• SPL Fixtures
• Automatic Weld Unit
• Center Bearing Support
• Transmission Slip Chuck

FIXTURING FIXTURING


YouTube channel link

Home  |  Products  |  Training Videos  |  FAQ  |  Financing  |  Parts | Contact
Copyright © 2023 Westport Machine Works, Inc. All rights reserved.
Website by Larzelere Design